Description

Stainless steel construction, AISI 304 (1.4301).
Pass through type. Designed for thoroughly washing of plastic crates. Crates are transported through the machine by a conveyor with steel chain. There are two sections in the machine: for cleaning and for rinsing plus a blowing module. The crates are poured with circulating cleaning solution heated up to 50-55°C in the cleaning section. The temperature is controlled by a thermo regulator. The solution is kept in the reservoir of the machine. The cleaning solution is evenly distributed over the crates through a system of nozzles with adjustable direction. After the washing is over, the crates go through a rinsing section. There, they are rinsed with clean hot water /80-85°С/ by a collector with nozzles. This water is supplied by the water main of the customer. The rinsing water goes into the reservoir for main cleaning and refreshes the cleaning solution while the filth is led away through the overflow drain of the reservoir.
Options: a washing agent dispenser, a system for loading and unloading crates from the one machine side, an aspiration hood with / without a fan, a drum filter, automatic filling and refilling the tank, automatic injection of disinfectant in the rinsing collector, touchscreen control panel.
Blowing module: Designed for removing up to 80% of the remaining water after the washing process by blowing with atmospheric air under high pressure. Pass through type. Crates are transferred through the module by a steel chain conveyor.
Drying modules with warm air, heated by steam or electricity can be manufactured on customer’s request.
Technical data
Crates dimensions: 600 x 400 x 150 / 300 mm
Water inlet: ¾”, 4-6 bar – fill up reservoir
½”, 4-6 bar – 80-85°C rinsing water
Water outlet: 1 ½”
Electrical connection: 400V/50Hz
Steam connection: ½”, 3 bar, 130°C
Steam consumption: 80 ÷ 100 kg/h
Compressed air connection: ¼”, 4…6 bar (steam heating)