Description

Stainless steel construction, AISI 304 (1.4301). Pass through type. Designed for thoroughly washing of plastic crates. Crates are transported through the machine manually or by a conveyor with a steel chain. There are two sections in the machine: one for basic cleaning and one for rinsing. The crates are poured with circulating cleaning solution heated up to 50-55°C in the cleaning section. The temperature is controlled by a thermo regulator. The solution is kept in the reservoir of the machine. The cleaning solution is evenly distributed over the crates through a system of nozzles with adjustable direction. When the basic washing is over, the crates go through a rinsing section. There they are rinsed with clean hot water /80-85°С/ by a collector with nozzles. This water is supplied by the water main of the customer. The rinsing water goes into the reservoir for main cleaning and refreshes the cleaning solution while the filth is led away through the overflow drain of the reservoir.

Options: a washing agent dispenser, a system for loading and unloading crates from the one machine side, an aspiration hood with / without a fan, a drum filter, automatic filling and refilling the tank, automatic injection of disinfectant in the rinsing collector, touchscreen control panel.

Technical data:
Crates dimensions: 600x400x150/300 mm
Pallets dimensions: 1200x800x160 mm
Water inlet: ¾”, 4 ÷ 6 bar – reservoir fill up
½”, 4 ÷ 6 bar – 80 ÷ 85 °C rinsing water
Water outlet: 1 ½”
Electrical connection: 400 V/50 Hz
Steam connection: ½”, 3 bar, 130°C
Steam consumption: 80 ÷ 100 kg/h
Compressed air connection: ¼”, 4 ÷ 6 bar (steam heating)